The LUBRIVAC 80is powered by by-pass motors, carbon brush type, providing a rapid cooling of the motor in case of overheating. The motors are installed inside a sturdy plastic case; special noise buffers reduce the noise within the safety standards of work. The aluminium die-cast suction inlet has 80mm., and can be used with hoses ranging from 80 to 40 mm.
The dust kit is made by a double bag type filter, made up by a polyester filter on the inside, providing a good filtration (3 micron efficiency (cat. L), and nylon on the outside, in order to protect the main filter from abrasive or cutting material. The dust filter has a self cleaning system, which causes the dust to shake off each time the vacuum is shut off.
The wet kit consists of a floating device, protecting the motor against damage from liquids, foam and solid objects; a nylon filter prevents solid material blocking the floating, or foam getting to the motors. An 80 lt. container enables to dispose easily of the sucked up liquid, which can be discharged by a flexible discharge hose. The frame is made of epoxidic painted steel and mounted on four wheels, two of them rotating and one with brake.
A Ø 50mm. accessory kit ( 80-50 MM. steel hose connector, a PVC flexible hose ( 50 mm., length 2,5 mm.), an aluminium flat nozzle and a PVC hand-brush) is supplied with the vacuum.
LUBRISHOP is a specialist distributor for high quality lubricants, and equipment for the metalworking industry.We recognise the importance of supplying these products directly to our end user or OEM customers correctly, quickly and competitively thus maintaining their continuous services and production.