Quality Metalworking Fluids and Equipement
Quality Metalworking Fluids and Equipement
LUBRIGUARD 10 is a solvent deposited water displacing corrosion preventative.
LUBRIGUARD 10 is a blend of de-watering agents, corrosion inhibitors, hydrocarbon mineral oils, synthetic sulphonates and hydrocarbon solvents. It offers short term protection of ferrous and aluminium alloy components. It leaves a light oily anti corrosion film when applied. It is ideally suited to inter-process protection after machining
Benefits:
Solvent deposited
Excellent dewatering properties
LUBRIGUARD 10 is best applied by dipping, spraying or brushing. If a tank is being used the residual water should be drained off periodically. Allow up to 50 minutes drying time. It may affect some rubbers and plastics on long-term exposure.
Product Specification:
| Protection Indoors | 3-6 months |
| Protection Outdoors | 1 month |
| Protection Outdoors covered | 2 months |
| Thickness | 2.1 microns |
| Covering capacity | 60 sq.mtrs. / ltr |
Typical Test Data:
| SG @ 15.6°C | 0.830 |
| KV @ 40°C (cSt) | 2.94 |
| Film type | Thin oily |
| Odour | Solvent |
Additional information
| Weight | 20 kg |
|---|---|
| Size | 1000 Litre, 20 Litre, 205 Litre |
